News · Magazin · Tests & Technology

E-bikeBikeboard Story07.10.26238 Views

Mondraker Zendit 2027

Enduro geometry, three builds and a motor with up to 150 Nm: We take a closer look at the frame, drive system and prices of Mondraker’s new flagship.

We weren’t exactly early this time. The Mondraker Zendit made its debut back in spring, but somehow slipped through our editorial net until now. Never mind, because with an eye on 2027, the bike is becoming more interesting rather than simply older – and the Indian summer colours from the product shoot fit the current autumn rather nicely.

As Mondraker’s new e-MTB flagship and one of the most exciting bikes built around the Avinox M2S, the Zendit definitely still deserves a place in the Bikeboard shop window. And even a few months after its presentation, the key figures have lost none of their appeal. There’s 165 mm of rear travel paired with 170 mm up front, while the Zendit rolls out of the shop as a mullet as standard, with 29" at the front and 27.5" at the rear. Add to that an entirely new Stealth Air Full Carbon frame, Mondraker’s further-developed Zero Suspension, two different flip-chip solutions and, right in the middle, the Avinox M2S with an 800 Wh battery.

So it’s high time we took a closer look at the bike here on Bikeboard. For now, only on paper – because we’d much rather tell you how the Zendit rides. There’s a good chance we’ll be able to do exactly that before long. But first, the facts.

 165 mm of travel, mullet wheels, 800 Wh and up to 150 Nm: On paper, at least, the Zendit makes little attempt to blend discreetly into the background. 

Hero shot of the Mondraker Zendit
Hero shot of the Mondraker Zendit
Avinox control unit on the Mondraker Zendit
Avinox control unit on the Mondraker Zendit
Charging port on the Mondraker Zendit
Charging port on the Mondraker Zendit
Avinox handlebar remote on the Mondraker Zendit
Avinox handlebar remote on the Mondraker Zendit

New from the ground up

The Zendit isn’t an existing frame with a suitable motor somehow bolted in after the event. Mondraker developed the bike from the ground up around the new Avinox drive unit. You can see that not only in the compact integration, but above all in the rear suspension.

The latest generation of Zero Suspension provides 165 mm of travel. Compared with previous versions, the kinematics have been designed to be more progressive, with 25,7 % progression. Mondraker also quotes a higher leverage ratio and slightly lower anti-squat and anti-rise values. The idea is to make the rear suspension more sensitive at the beginning of its travel while still providing enough reserves when things get rough.

The shock measures 205 x 65 mm and uses a trunnion mount. Mondraker recommends around 28 % sag, or 18 mm at the shock, with a maximum of roughly 33 % or 21,5 mm.

The carbon frame is identical across all three models. Mondraker quotes almost exactly 3.000 grams for a painted frame in size ML, including hardware but without the shock.

Avinox M2S: Power to spare

One of the most important components sits around the bottom bracket. According to the manufacturer, the Avinox M2S weighs 2,65 kg and normally delivers up to 130 Nm of torque. In Boost mode, as much as 150 Nm and a maximum peak output of 1.300 watts are available for short periods. Its rated continuous output is 250 watts, while the maximum assistance factor is a hefty 800 %.

Weight
2,65 kg
Torque in Boost
150 Nm
Battery
800 Wh

Motor & battery

Battery weight
approx. 3,77 kg

General

Max. torque
130 Nm
Max. assistance factor
800 %
Peak output
1.300 W
Rated output
250 W
Dimensions
107 x 172 mm
Protection rating
IP66

That said, based on our experience with other Avinox bikes, these figures are really more fodder for pub debates. 150 Nm and 1.300 watts look impressive on paper; far more interesting is how sensitively and controllably Avinox delivers that power to the rear wheel on loose or technical terrain.

To achieve this, the system packs in plenty of sensors. Alongside torque, cadence and speed, the M2S processes data from an integrated IMU as well as a barometer, compass and ambient light sensor. The speed sensor also feeds into the power delivery control, helping to produce the most precise and predictable power delivery possible, along with good traction.

 150 Nm and 1.300 watts for pub talk, finely tuned control and electronics for the trail 

800 Wh and no range extender

Mondraker doesn’t do things by halves with the battery, opting exclusively for the fully integrated 800 Wh version in the down tube. According to the manufacturer, it weighs around 3,77 kg. The battery management system is intended to retain 80 % of the original capacity after 500 charging cycles.

There is no range extender for the Zendit. While the battery can technically be removed, the motor has to come out first – a job best left to a mechanic at a specialist dealer. For anyone charging in a flat without a socket near the bike storage area, that is certainly a detail worth keeping in mind before buying.

The charger differs between models. XR buyers get a 12 A GaN fast charger rated at 508 watts. It is said to reach 75 % in around 1:30 hours and 100 % in roughly 2:25 hours. The RR S and RR come with the 4 A/168 W charger. Here, Mondraker quotes 4:28 hours to 75 % and 5:10 hours for a full charge.

Display, app and electronic extras

The drive system is operated via the Avinox DP100 touchscreen integrated into the top tube and two wireless BC100 controllers. The Auto, Eco, Trail, Turbo and Boost assistance modes can be customised both on the bike and through the Avinox Ride App.

Among other things, the system also offers ride-data recording and Strava integration, control of compatible action cameras, 65 W PD 3.0 charging via USB-C, plus a digital motor lock with alarm and tracking functions.

One interesting detail concerns the electronic shifting: on every Zendit model, the SRAM T-Type AXS rear derailleur draws power directly from the main battery. That eliminates the separate AXS battery on the derailleur. At the same time, Mondraker says the Auto Shift function is available – even while coasting without pedalling. We already know the principle from other systems. Rolling Shift in particular – changing gear while coasting, without having to pedal yourself – can be genuinely useful on the trail.

Mullet as standard, 29er if desired

Mondraker supplies every Zendit as a mullet: 29" at the front and 27.5" at the rear. But if you absolutely insist on two big wheels, there’s no need to reach for the angle grinder, welder or carbon adhesive.

A flip chip in the lower link allows you to convert the bike to a 29" rear wheel. This lengthens the chainstays by 7 mm, while Mondraker says the rear-suspension kinematics, bottom bracket height and key geometry angles remain unchanged. Tyre clearance and brake calliper position also stay the same. After the conversion, you only need to adjust the wheel configuration accordingly in the Avinox Ride App.

It is also interesting that Mondraker doesn’t take a "one size fits all" approach to chainstay length. Sizes S, M and ML get 450 mm stays, while L and XL use 455 mm. The pivot positions have also been adapted to the frame sizes to achieve the most consistent leverage ratio possible across the entire size range, and therefore comparable ride characteristics.

 Mullet from the factory, full 29er if desired: A flip chip lengthens the chainstay by 7 mm while preserving the fundamental geometry. 

Chips with everything

And because one flip chip apparently rarely comes alone, there’s a second one for the geometry. Alongside the standard factory position, a Low position is also available.

Geometry setupStandardLow
Head angle63,5°63,15°
Effective seat angle77°76,65°
Bottom bracket height345 mm340 mm
ReachBase value-4 mm

Mondraker has deliberately kept the changes relatively small. The bottom bracket drops by 5 mm, the head angle slackens by 0,35° and the reach shortens by 4 mm. That lets you tweak the character a little without immediately turning the Zendit into a different bike.

Five sizes instead of four

The Zendit is available in five sizes, from S to XL. Mondraker slots an additional ML size between M and L. That alone shows that the Spanish brand doesn’t simply want to inflate or shrink the frame triangle when it comes to proportions.

In the Standard position, the geometry chart lists a 63,5° head angle and a 77° effective seat angle. Together with the 450 or 455 mm chainstays, the intention is pretty clear: the Zendit is meant to get properly stuck in on descents, while still turning the motor’s power into useful forward drive on technical climbs.

For anyone wanting to push even further towards gravity riding, Mondraker says the frame can handle forks with up to 180 mm of travel or a maximum axle-to-crown height of 600 mm. The standard 170 mm is still recommended, however. Maximum tyre width is 66 mm, or nominally 2,6".

Three Zendits for 2027

The basic recipe remains the same for the XR, RR S and RR: Stealth Air Full Carbon frame, 165 mm of rear travel, 170 mm up front, Avinox M2S, 800 Wh and mullet wheels. The differences lie in the suspension, wheels, brakes, drivetrain and dropper post – and, as expected, the price.

 Zendit XRZendit RR SZendit RR
Frame & Suspension
FrameStealth Air Full Carbon, Zero Suspension, 165 mm, Forward Geometry, integrated battery, UDH, 12x148 mm BoostStealth Air Full Carbon, Zero Suspension, 165 mm, Forward Geometry, integrated battery, UDH, 12x148 mm BoostStealth Air Full Carbon, Zero Suspension, 165 mm, Forward Geometry, integrated battery, UDH, 12x148 mm Boost
SizesS, M, ML, L, XLS, M, ML, L, XLS, M, ML, L, XL
Travel170/165 mm170/165 mm170/165 mm
ShockFox Float X2 Factory Kashima, 205x65 mm, TrunnionFox Float X Factory Kashima Evol LV, 205x65 mm, TrunnionFox Float X Factory Kashima Evol LV, 205x65 mm, Trunnion
Shock tuneCS30, Bleed 1,1, RS40, Rezi B40, LML, Long MCU, volume spacer 0CS30, Bleed 1,1, RL50, Rezi B40, LML, Standard MCU, volume spacer 0CS30, Bleed 1,1, RL50, Rezi B40, LML, Standard MCU, volume spacer 0
ForkFox Podium 29 Float GRIP X2 Factory Kashima, 170 mmFox Podium 29 Float GRIP X2 Factory Kashima, 170 mmFox 38 29 Float GRIP X2 Factory Kashima, 170 mm
Fork axle20x110 mm Boost20x110 mm Boost15x110 mm Boost Kabolt
Fork offset44 mm44 mm44 mm
Cockpit
HeadsetAcros Custom ZS56/ZS56, internal cable routingAcros Custom ZS56/ZS56, internal cable routingAcros Custom ZS56/ZS56, internal cable routing
StemONOFF S9, 30 mm, 0°, Full CNC, 31,8 mmONOFF S9, 30 mm, 0°, Full CNC, 31,8 mmONOFF S9, 30 mm, 0°, Full CNC, 31,8 mm
HandlebarONOFF S9 1.0 Carbon, 800 mm, 25 mm rise; L/XL: 38 mm riseONOFF S9 1.0 Carbon, 800 mm, 25 mm rise; L/XL: 38 mm riseONOFF S9 1.0 Carbon, 800 mm, 25 mm rise; L/XL: 38 mm rise
Handlebar angles8° backsweep / 5° upsweep8° backsweep / 5° upsweep8° backsweep / 5° upsweep
GripsONOFF Desert Pro CNC Lock-On, 135 mm; thicker on L/XLONOFF Desert Pro CNC Lock-On, 135 mm; thicker on L/XLONOFF Desert Pro CNC Lock-On, 135 mm; thicker on L/XL
Saddle & Seatpost
SaddleErgon SM10 E-MountainErgon SM10 E-MountainErgon SM10 E-Mountain
SeatpostRockShox Reverb AXS, 31,6 mmFox Transfer Factory Kashima, 31,6 mmONOFF Pija, 31,6 mm
Travel S125 mm95-120 mm115-140 mm
Travel M150 mm125-150 mm135-160 mm
Travel ML175 mm155-180 mm155-180 mm
Travel L/XL200 mm185-210 mm185-210 mm
Brakes
BrakeSRAM Maven Ultimate, 4-pistonSRAM Maven Silver, 4-pistonSRAM Maven Base, 4-piston
Front rotor220 mm HS2, 6-bolt200 mm HS2, 6-bolt200 mm Centerline, 6-bolt
Rear rotor200 mm HS2, 6-bolt200 mm HS2, 6-bolt200 mm Centerline, 6-bolt
PadsSintered, steel backing plateSintered, steel backing plateOrganic, steel backing plate
Brake leverMaven Ultimate, carbon, SwingLink, tool-free reach adjustmentMaven Silver, SwingLink, tool-free reach adjustmentMaven Base, DirectLink, tool-free reach adjustment
Wheels & Tyres
Wheel size29" front / 27,5" rear29" front / 27,5" rear29" front / 27,5" rear
RimsDT Swiss Hybrid HXC 1500 Spline Carbon, 30 mm, Tubeless Ready, 28-holeDT Swiss Hybrid HX 1700 Spline aluminium, 30 mm, Tubeless Ready, 28-holeDT Swiss Hybrid H 1900 Spline aluminium, 30 mm, Tubeless Ready, 28-hole
SpokesDT Swiss complite T-Head HybridDT Swiss Hybrid III Straight-PullDT Swiss Hybrid I Straight-Pull
Front hubDT Swiss 240, 20x110 mm Boost, 6-boltDT Swiss 350, 20x110 mm Boost, 6-boltDT Swiss 370, 15x110 mm Boost, 6-bolt
Rear hubDT Swiss 240, 12x148 mm Boost, XD, 72T Ratchet DEGDT Swiss 350, 12x148 mm Boost, XD, 72T Ratchet DEGDT Swiss 370, 12x148 mm Boost, HG, 18T Ratchet LN
Front tyreMaxxis Assegai 29x2,5 WT, 3C MaxxGrip, DD, 120x2 TPIMaxxis Assegai 29x2,5 WT, 3C MaxxGrip, EXO+, 60 TPIMaxxis Assegai 29x2,5 WT, 3C MaxxGrip, EXO+, 60 TPI
Rear tyreMaxxis Minion DHR II 27,5x2,5 WT, 3C MaxxTerra, DD, 120x2 TPIMaxxis Minion DHR II 27,5x2,5 WT, 3C MaxxTerra, DD, 120x2 TPIMaxxis Minion DHR II 27,5x2,5 WT, 3C MaxxTerra, DD, 120x2 TPI
Drivetrain
Cranksete*thirteen Helix Race Carbon e*spec, 155 mme*thirteen Helix Race e*spec aluminium, 155 mme*thirteen Helix Core e*spec aluminium, 155 mm
ChainringSRAM Eagle T-Type, 36T, steel, 104 BCD, CL55SRAM Eagle T-Type, 36T, steel, 104 BCD, CL55SRAM Eagle T-Type, 36T, steel, 104 BCD, CL55
Rear derailleurSRAM X0 Eagle AXS T-Type, 12-speedSRAM X0 Eagle AXS T-Type, 12-speedSRAM S1000 Eagle AXS T-Type, 12-speed
ShifterSRAM Eagle AXS Pod Rocker PaddleSRAM Eagle AXS Pod Rocker PaddleSRAM Eagle AXS Pod
CassetteSRAM XS-1275, 10-52T, T-TypeSRAM XS-1275, 10-52T, T-TypeSRAM XS-1270, 10-52T, T-Type
ChainSRAM GX Eagle T-Type Flattop, PowerLockSRAM GX Eagle T-Type Flattop, PowerLockSRAM GX Eagle T-Type Flattop, PowerLock
OtherSRAM AXS Extension CordSRAM AXS Extension CordSRAM AXS Extension Cord
E-System
MotorAvinox M2SAvinox M2SAvinox M2S
BatteryAvinox 800 WhAvinox 800 WhAvinox 800 Wh
DisplayAvinox DP100Avinox DP100Avinox DP100
ControllerAvinox BC100 Wireless left/rightAvinox BC100 Wireless left/rightAvinox BC100 Wireless left/right
ChargerAvinox 12 AAvinox 4 AAvinox 4 A
Weight & Price
Weight*22,9 kg22,8 kg22,8 kg
Price AT/DE12.499 €10.499 €8.499 €

*Weights according to the manufacturer. *) Weights according to the manufacturer.

In Austria and Germany, the range starts at 8.499 euros for the RR, followed by the RR S at 10.499 euros, with the XR sitting at the top for 12.499 euros.

Curiously, the most expensive Zendit is not the lightest according to the manufacturer. The XR comes in at 23,1 kg, the RR S at 22,9 kg and the RR at 22,8 kg. With a 165-mm e-enduro packing 800 Wh, though, there is little point turning a few hundred grams into a matter of state.

What you actually get for the extra money is more interesting anyway. That question will become particularly intriguing once we can put one of the models on the scales and then take it onto the trail. On paper, at least, the RR at 8.499 euros looks anything but a conventional budget version.

Mondraker Zendit RRS
Mondraker Zendit RRS
Mondraker Zendit RR
Mondraker Zendit RR
Mondraker Zendit XR
Mondraker Zendit XR

Useful Details

Away from the headline figures, there are a few small details that could prove far more relevant in everyday use than the final ten newton metres.

There is room for a water bottle in the main frame, and Mondraker even provides two possible positions for the bottle cage. As standard, the cables run externally past the head tube, but they can also be routed through the headset, which is prepared for this purpose. Fans of good old-fashioned serviceability and devotees of the cleanest possible look can, for once, rejoice at the same time.

There is flexibility on the suspension front too. Alongside the standard Fox shocks, Mondraker says the Zendit is compatible with the Fox DHX, various RockShox air and coil shocks, as well as the Öhlins TTX Air and TTX22 m.2. The one exception is the RockShox Vivid Air in frame size S. Rear brake rotors of up to 220 mm can be fitted. All small details, but on a bike in this price bracket it is rather reassuring to know that future upgrades will not hit a proprietary dead end at the first hurdle.

On Paper

That makes the Zendit a rather interesting example of where the current generation of full-power e-MTBs is heading. An 800 Wh battery no longer has to be wedded to a 25-kg lump, while motor performance has reached a level where maximum torque is no longer the most interesting question anyway. The rest looks coherent on paper too: moderate weight considering the battery and travel, five frame sizes, size-specific chainstays, mullet or full 29", two geometry positions and suspension where Mondraker has clearly made no attempt to turn an enduro bike into a touring bike.

Naturally, this product introduction cannot tell us whether the reality lives up to the spec sheet. For that, you need dirty tyres, plenty of climbing, a few key sections on the home trails and, ideally, several weeks of riding. Let’s see whether a Zendit finds its way into our editorial office soon.

Keep reading

All Mondraker reviews
Magazin

KTM Macina Kapoho 8971

KTM's Macina Kapoho offers, with its modern Bosch‑Shimano combo and Fox suspension, above all plenty of comfort and range. It was the first time we got to ride Shimano's Cues drivetrain and shredded the trails with the KTM rail-rocket in a test ride.

Magazin

Review: Conway Nyvon 12.0 E-Allroad

First thorough test of the stylish carbon all-road bike from Germany, featuring the powerful Bosch Performance SX drive unit for ambitious gravel riding or relaxed urban adventures.

Magazin

KTM Scarp Evo 3

Just in time for the Olympic Games the Upper Austrians have revamped their race-ready full-suspension bike. The third generation offers three suspension travel classes from 100 to 140 mm and many new details.